Inkjet Glitter Transfers

R277.00R1,100.00

Glitter heat transfer only comes with a white backing.

It is not suitable for polyester fabrics

Can be used with a heat press or iron.

High-temperature pigment ink is used for printing. The selection of printing mode is quality – high quality, paper type – ordinary paper, do not mirror image.

Press settings:  165 ℃ and 15s, and the pressure are low.

Before transfer, pre-press item.

Peel the backing of the transfer, put face up on the item and cover with silicon paper. Press at the recommended time and temperature. (You can hand cut the image if needed)

Iron transfer printing: the iron temperature is adjusted to the “cotton/hemp” position. When the iron temperature reaches, the pattern is covered with high-temperature the silicon paper. During the transfer, the weight is cycled from the edge to the center (about 8-10kg, the body’s center of gravity is on the iron), and each part of the pattern should stay at 30-60s, Attention: when moving the iron, the pressure must be reduced, otherwise the pattern will crack. A4 size paper needs to be ironed for 3-4 minutes.

It can be washed 24 hours after printing. It can be machine washed or hand washed. When washing, do not rub the pattern directly. It is not allowed to soak for a long time, bleach, or dry. The machine washing can not be forced for more than 45 minutes. The times of water-resistance can reach 30 times.

Clear

Description

High-quality dark transfer paper for cotton shirts. Printable with Inkjet printer. The result is a shimmer effect after the first wash.

Available pack sizes:

10 x A4 sheets

50 x a4 sheets

 

 

Additional information

Weight .200 kg
Dimensions 25 × 25 × 13 cm
pack size

10 sheets, 50 sheets